Power Sluice with Pump, Hoses – CC690 Power Sluice – Gold Mining Equipment

Amazon.com Price: $2,144.99 (as of 13/02/2019 05:31 PST- Details)

This CC690 Power Sluice folds together for wheeling down to your dig site (The legs and wheels store inside the troughs when transporting). It can then be quickly set up with no tools and there are no tiny parts to lose. It is powered with a common 6.5hp, 3 inch trash pump. The water is run through a 2 inch suction hose and a 2 inch lay flat hose at 150 gpm (included).
Simple spray bar assembly and pivoting grizzly. The grizzly pivots to allow you to dump the large rocks out onto an inspection plate before they are discarded.
Grizzly cross-spars prevent long, skinny rocks from getting through, and a flat plate on the back of the grizzly prevents material from being shoveled through the back. Frame is continuous around the whole grizzly.

Usually ships in 4-5 business days

Description

When you purchase this Power Sluice Package with Pump and Hoses, you get:

The CC690 Power Sluice /Highbanker Length: 54 inches wide x 17 inches high x 15 inches; weighs 70 pounds

Gasoline Powered Trash Pump: Power Max 6.5 HP, 3 inch gasoline powered pump with two inch hose fitting adapters.
Total head lift is 98 feet. Suction head lift is 26 feet. Max output is 220 GPM. Weighs 70 pounds.

50 feet of blue lay flat 2 inch discharge hose with swivel fittings

20 feet of clearflow 2 inch suction hose with swivel fittings (combined weight of both hoses is 34 pounds)

Made in the USA. Manufacturer provides 1 year warranty.

All these components add up to a top notch Power Sluice Package that is an ideal piece of gold mining equipment. What are you waiting for? Get out there and get your share of the gold!

This CC690 Power Sluice folds together for wheeling down to your dig site (The legs and wheels store inside the troughs when transporting). It can then be quickly set up with no tools and there are no tiny parts to lose. It is powered with a common 6.5hp, 3 inch trash pump. The water is run through a 2 inch suction hose and a 2 inch lay flat hose at 150 gpm (included).
Simple spray bar assembly and pivoting grizzly. The grizzly pivots to allow you to dump the large rocks out onto an inspection plate before they are discarded.
Grizzly cross-spars prevent long, skinny rocks from getting through, and a flat plate on the back of the grizzly prevents material from being shoveled through the back. Frame is continuous around the whole grizzly.
This Power Sluice is a water operated, centrifugal concentrator and is capable of processing large volumes of material without the need for pre-classification. Existing sluice designs rely mainly on gravity to capture gold. With the CC690, not only is the force of gravity at work to trap gold, but the very force of the water itself is used to create high energy vortices that trap and hold gold particles against the matting. These forces combine to help the smaller particles work their way deep into the looped,vinyl fibers of the matting and on down to the grooves of the underlying v-ribbed rubber mat where they remain until it is time to perform the clean up operation.
Hungarian riffle assembly features aggressive angle riffles over heavy duty miner’s moss and deep v-ribbed rubber matting in top trough. The 3/4 inch material that washes through the grizzly runs over some very aggressive aluminum angle riffles before dropping down into the bottom trough. The bottom has 2 sizes of expanded metal riffle sections: 3/4 inch and 3/16 inch heavy gauge aluminum. Top and bottom trough are 4 feet long by 1 foot wide. There is deep v-groove matting under heavy vinyl miner’s moss under all riffle sections to securely retain any captured gold.

Additional information

Manufacturer

Reviews

There are no reviews yet.

Be the first to review “Power Sluice with Pump, Hoses – CC690 Power Sluice – Gold Mining Equipment”

Your email address will not be published. Required fields are marked *